The impact crusher is used in the process of stone production line

Stone production line, the first process is supplied to the jaw crusher by the vibration feeder, and then followed by the impact crusher, where the role of the jaw crusher is to break the bulk material into the impact crusher, to achieve the customer needs between 20-60 particles, the use of high-speed rotating rotor on the plate hammer, The material sent into the crushing chamber has a high-speed impact and is broken, and the broken material is thrown at a high speed along the tangential direction to the counter plate at the other end of the crushing chamber, is broken again, and then rebounds from the counter plate to the plate hammer, and continues to repeat the above process.

Whether it is in the sand production line, stone production line, our purpose is to ensure that the impact crusher, jaw crusher can operate normally and continuously, in order to extend the service life of the crusher, we must carry out periodic maintenance and maintenance of the impact crusher during use, which is an indispensable process. Our factory has a variety of crusher equipment before the factory has done a long idling, in order to reduce the future use of the process of failure, our customers in the new machine put into operation, each shift after the operation must be a comprehensive inspection of the impact crusher, each part tightening, belt drive is normal, lining wear situation has a comprehensive understanding. There are periodic, timed inspections.

In the purchase of impact crusher at the same time, we have to understand what are the wearing parts, because the crushing process of large materials will wear the lining plate, the impact plate, in the replacement process must follow the principles, first open after the shelf, after the shelf and the box of the connection bolts removed, and then use a wrench to screw the hexagonal head part of the clamshell device, and then the shelf slowly open. At the same time, the rear frame can be lifted by the hanging device above the frame. Repeat the above process, that is, after closing the shelf. When the hammer is worn to a certain extent, it should be adjusted or replaced in time to avoid damage to fasteners and other parts, resulting in greater losses.

Jaw crusher, impact crusher in the stone production line plays an important role in crushing, before the problem does not appear, must be checked in detail, can not believe the careless, so as not to be penny-foolish, resulting in normal operation.