Hammer crusher work precautions

Maintenance and precautions of hammer crusher

1, often pay attention to the fasteners fixed and tightness.

2, regularly check the screen adjustment, if there is a blockage should be removed immediately.

3, pay attention to check the wear degree of easily worn parts, and replace the worn parts at any time.

4. The feed should be uniform to prevent excess negative phenomenon.

5, the machine is strictly prohibited to carry out any adjustment, cleaning, maintenance work, so as to avoid danger.

6. If the machine is working, it should be stopped immediately for repair before it can continue to work.

7, when stopping, all the materials in the machine must be spit out, and the power must be cut off during maintenance.

8, bearing refueling should be timely, three months to replace the lubricating oil once, oil change must use clean gasoline or not carefully clean the bearing.

Previous page: Granite, river pebbles, basalt, diabase crushing process analysis

Next: Jaw crusher installation adjustment and test run